Scrumble .... a small piece of work

All rights reversed This site is powered by WordPress and Augatti. It has been created with a hope that others may be inspired to transform dreams into plans. The original material may be copied in accordance with the principles of copyleft.

No Microsoft products were used in the creation of this website

Get Ubuntu


This is a journal of our project - a Bob Oram Design 44C cruising catamaran that we are building in the Top End of Australia. See Index of posts for a list of all entries. Go to most recent post by clicking the Scrumble logo.



FlickrRecent Photos

the Boatbuilding Ring - Click to Join
Prev | Random | List | Next


:: dotProject :: Wordpress

Scrumble Specifications

Plan View

  • Length: 13.5m/44′3″
  • Beam: 6.4m/21′
  • Draft: 0.4m/16″
  • Displacement: 5200kg
  • Bridgedeck Clearance: 0 .735m/29″
  • Sail Area: 100 square metres
  • Designer: Bob Oram Design
  • Hull Material: Composite - Duflex (Balsa Cored EGlass),Epoxy and EGlass
  • Deck Material: Composite - Duflex (Balsa Cored EGlass),Epoxy and EGlass
  • Engine: 2 x 20hp Honda four stroke outboard
  • Fuel:
  • Steering: Hydrive through Nautical Supplies Darwin
  • Water: 2 x 300 litre Turtlepac standard with the outlet relocated to the centre of the forward (lowest end)
  • Dinghy: Stessl Edgetracker 3.85m (already named “Skedadle“)
  • Outboard: 30hp 4 Stroke Honda
  • Shower: 2 - starb fwd (Behind Sail Locker) - port opp fwd dbl bunk space (equipment room)
  • Head/Toilet: 1 Lavac Manual/Electric Combo Forward Owners Hull, 1 Portable Toilet Forward Starboard Hull
  • Accommodation: 7 Berth, 2 Queen Size Aft Cabins, 1 King Single Forward Cabin (Starboard), 1 Saloon Convertible Settee
  • Galley: L-Shaped on Bridgedeck, Smev 2 Burner Gas Stove, Smev Sink, Midsize Convection Microwave Oven, Gas BBQ (Rear Cockpit)
  • Refrigeration: not decided2
  • Electrics: solar, wind, Honda gasoline genset, other not decided2
  • Electronics: TackTick plus other not decided
  • Mast/Rigging: Twin Carbon Masts with Wishbone booms
  • Sail Inventory: To be made at Nautical Sails by Gary Mappas
  • Deck Gear: Anderson Winches and Nomen Cleats other not decided1
  • Ground tackle: Muir Atlantic VR2500 + chain + Rocna25 + Rocna25
  • Safety Gear: not decided1
  • Tools
  • not decided1 items will probably be sourced through Cocky at The Yacht Shop , Fannie Bay, Darwin
  • not decided2 items will probably be sourced through Outback Marine